Sturdy, powerful and electromechanical - these are the qualities that allow this automation system to be reliable over time, even with large gates. CAME offers a complete selection of linear electromechanical gate operators that do not require periodic maintenance or internal adjustments.
The microswitch controlling stop during opening allows for easy adjustment of the wing position.
ATI WORM DRIVE GATE KIT - PAIR OF GATES (ATI-P)
(A5000A MOTORS) KIT 
| Code: |
21ATIP |
| Sold as: |
EACH |
Kit Includes:
2 x ATI 240V motors
1 x 240V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
ATI WORM DRIVE GATE KIT - SINGLE LEAF (ATI-S)
(A5000A MOTOR) GATE KIT
| Code: |
21ATIS |
| Sold as: |
EACH |
Kit Includes:
1 x ATI 240V motor
1 x 240V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
 ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
 21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
|
[top of page]
FAST is the new articulated transmission arm automation for gates with wings up to 2.3m for each wing. A new product, which measures up to precise application demands: it can be installed on to relatively small posts and columns (from 20cm).
Choosing the FAST series automation, means assuring yourself of a quick to install product, where all operations of affixing and electrical connection have been simplified.
Protected by a dedicated locked door, the convenient release knob allows the gate to be manually opened without mains power.
FAST' GATE KIT - FOR PAIR OF GATES
| Code: |
21FASTP |
| Sold as: |
EACH |
Kit Includes:
2 x FAST 240V motors
1 x Built in 240V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote controls
1 x Pair safety photocells
1 x Flashing light
Technical Information
|
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
[top of page]
FERNI: the IDEAL solution for existing gates and with large sized posts; installs on single panels up to 4m in a central position with respect to the post (up to 38cm of distance between the gate pivot and the wall mounting of the motor).
The micro switches controlling arrest during opening/closing allow a rapid and precise adjustment of the wing position.
FERNI ARTICULATED GATE KIT FOR PAIR OF GATES (FERNI-P) 
| Code: |
21FERNIP |
| Sold as: |
EACH |
Kit Includes:
2 x FERNI 240V motors
1 x 240V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
FERNI ARTICULATED ARM GATE KIT -
SINGLE (FERNI-S) LEAF
| Code: |
21FERNIS |
| Sold as: |
EACH |
Kit Includes:
1 x FERNI 240V motor
1 x 240V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
|
[top of page]
FROG is the most functional and desirable solution for every type of swing gate. It is the best way to automate a gate without altering its shape and design. In the CAME tradition the reduction gear is electromechanical, to ensure smooth precise and safe movement over time.
CAME offers the possibility of choosing among three new gate-release solutions:
- A basic solution with a release lever.
- Two more sophisticated versions, where the gates unlock only via a special three-sided key or with a personalised DIN cylinder key.
FROG UNDERGROUND GATE KIT FOR SINGLE (FROG-S) LEAF GATE
| Code: |
21FROGS |
| Sold as: |
EACH |
Kit Includes:
1 x Underground casing
1 x Underground 240V motor
1 x 240V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information |
|
FROG UNDERGROUND GATE KIT FOR PAIR OF
(FROG-P) GATES
| Code: |
21FROGP |
| Sold as: |
EACH |
Kit Includes:
2 x Under ground casings
2 x Under ground 240V motors
1 x 240V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
FROG AE GATE KIT FOR PAIR OF GATES INCLUDING ENCODER
| Code: |
21FROGAEP |
| Sold as: |
EACH |
|
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
[top of page]
This system has always matched stability and silence with new functions offered by evolving technology. The special finishing allows for gearmotors to be installed also in non-standard-type architectural contexts.
The micro switches controlling arrest during opening/closing allows for a rapid and precise adjustment of the wing position.
In the KRONO versions all equipment is made of aluminium to ensure maximum sturdiness and compactness in the event of possible bumps.
KRONO GATE KIT - FOR PAIR OF GATES )
SUPERSEDED BY 21KRONOP3
| Code: |
21KRONOP |
| Sold as: |
EACH |
Kit Includes:
2 x KRONO motors 240V
1 x Control panel 240V
1 x Radio receiver
1 x Tuned antenna
1 x Remote control handset
1 x Pair safety photocells
1 x Flashing in-movement light
Technical Information |
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
[top of page]
FROG is the most functional and desirable solution for every type of swing gate. It is the best way to automate a gate without altering its shape and design. In the CAME tradition the reduction gear is electromechanical, to ensure smooth precise and safe movement over time.
CAME offers the possibility of choosing among three new gate-release solutions:
- A basic solution with a release lever.
- Two more sophisticated versions, where the gates unlock only via a special three-sided key or with a personalised DIN cylinder key.
ATI WORM DRIVE GATE KIT - PAIR - 24v INTENSIVE USE - WITH ZL180 CONTROL BOARD
| Code: |
21ATIP24 |
| Sold as: |
EACH |
Kit Includes:
2 x ATI 24V motors
1 x Control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
24V ATI 5M SINGLE GATE AUTOMATION KIT ATI-S24 
| Code: |
21ATIS24 |
| Sold as: |
EACH |
Kit Includes:
1 x ATI 24V motors
1 x Control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
|
[top of page]
FERNI: the IDEAL solution for existing gates and with large sized posts; installs on single panels up to 4m in a central position with respect to the post (up to 38cm of distance between the gate pivot and the wall mounting of the motor).
24V FERNI PAIR OF GATES AUTOMATION KIT FERNI-P24
| Code: |
21FERNIP24 |
| Sold as: |
EACH |
Kit Includes:
2 x FERNI 24V motors
1 x control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
24V FERNI SINGLE GATE AUTOMATION KIT FERNI-S24
| Code: |
21FERNIS24 |
| Sold as: |
EACH |
Kit Includes:
1 x FERNI 24V motor
1 x control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
|
[top of page]
FROG is the most functional and desirable solution for every type of swing gate. It is the best way to automate a gate without altering its shape and design. In the CAME tradition the reduction gear is electromechanical, to ensure smooth precise and safe movement over time.
CAME offers the possibility of choosing among three new gate-release solutions:
- A basic solution with a release lever.
- Two more sophisticated versions, where the gates unlock only via a special three-sided key or with a personalised DIN cylinder key.
FROG KIT FOR PAIR OF GATES J SERIES 24V EN COMPLIANT
| Code: |
21FROGJP |
| Sold as: |
EACH |
Kit Includes:
2 x Under ground casings
2 x Under ground 24V motors
1 x 24V control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information |
|
FROG UNDERGROUND GATE KIT FOR PAIR OF 24V DC - INTENSIVE USE - (FROG-P) GATES
| Code: |
21FROGP24 |
| Sold as: |
EACH |
Kit Includes:
2 x Under ground casings
2 x Under ground 24V motors
1 x Control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
FROG UNDERGROUND GATE KIT FOR SINGLE 24V DC - INTENSIVE USE - (FROG-S) GATES
| Code: |
21FROGS24 |
| Sold as: |
EACH |
Kit Includes:
1 x Under ground casings
1 x Under ground 24V motors
1 x Control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information
|
|
LOCK-81 12V AC/DC (SINGLE CYLINDER)
ELECTRIC LATCH
| Code: |
21LOCK81 |
| Sold as: |
EACH |
|
|
21002ZA3N ZA4 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA4 |
| Sold as: |
EACH |
Technical Information |
|
ZA3 CONTROL BOARD FOR 2 SWING GATES
SUPERSEDED BY CODE: 21002ZA3N
| Code: |
21ZA3 |
| Sold as: |
EACH |
Technical Information |
|
[top of page]
An evolution in command logic and system control: CAME offers a range of automation systems for sliding gates up to 800 and 2200kg suitable for various installations, operations and safety requirements. Options include the basic version for residential use, to more sophisticated versions equipped with an ENCODER for a constant electronic control of the system, or with a low voltage motor for constant, intense operation.
The electronics operate a COMPLETE SELFDIAGNOSTIC TEST of all the safety devices connected to the system prior to activating the motor.
The ENCODER technology supersedes the mechanical end-stop concept, ensuring the electronic control of the system and the end-stop points.
(BKE versions)
Main Functions:
Beyond the usual command and safety functions, the new electronics offer certain features that hand over full control to the user, while optimising the service, including:
- PARTIAL DOOR OPENING for pedestrian passage, if applicable.
- SELF-CODING of the radio code between transmitter and receiver.
- PRE-FLASHING during opening and closing.
- GATE STOP directly by the radio transmitter.
- SAFETY EVEN WITH THE GATE STOPPED. Every opening or closing command is cancelled when an obstacle is detected by the photoelectric cells or by any other of the system's safety devices.
- Possibility of connecting a LAMP that lights up the passage area. MASTER-SLAVE function: greatest connection simplicity in the double-combined motor applications.
SLIDING GATE KIT FOR GATES UPTO 1200KG BK 1200
| Code: |
21BK1200KIT |
| Sold as: |
EACH |
The BK range of sliding gate automation - where flexibility and security meet. The BK range offers complete solutions with the widest selection of gate systems for collective passages such as apartments, hospitals and public entrance-ways. Innovative features such as "auto-diagnosis" on all the safety devices connected to the system ensure that the BK range is simple to set up and completely safe to use.
1 x BK 240V motor with built-in control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
All below gate kits are also available with automatic encoder as an extra by special request.
Gate kit BK-2200 uses CGZ6 toothed gate rack.
Gate kits BK-1200 and BK-1800 can use CGZ or CGZS toothed gate rack.
Technical Information
|
|
230V SLIDING GATE AUTO. KIT UP TO 1800KG
| Code: |
21BK1800KIT |
| Sold as: |
EACH |
The BK range of sliding gate automation - where flexibility and security meet. The BK range offers complete solutions with the widest selection of gate systems for collective passages such as apartments, hospitals and public entrance-ways. Innovative features such as "auto-diagnosis" on all the safety devices connected to the system ensure that the BK range is simple to set up and completely safe to use.
1 x BK 240V motor with built-in control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
All below gate kits are also available with automatic encoder as an extra by special request.
Gate kit BK-2200 uses CGZ6 toothed gate rack.
Gate kits BK-1200 and BK-1800 can use CGZ or CGZS toothed gate rack.
Technical Information
|
|
SLIDING GATE KIT FOR GATES UPTO 2200KG BK 1200
| Code: |
21BK1200KIT |
| Sold as: |
EACH |
The BK range of sliding gate automation - where flexibility and security meet. The BK range offers complete solutions with the widest selection of gate systems for collective passages such as apartments, hospitals and public entrance-ways. Innovative features such as "auto-diagnosis" on all the safety devices connected to the system ensure that the BK range is simple to set up and completely safe to use.
1 x BK 240V motor with built-in control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
All below gate kits are also available with automatic encoder as an extra by special request.
Gate kit BK-2200 uses CGZ6 toothed gate rack.
Gate kits BK-1200 and BK-1800 can use CGZ or CGZS toothed gate rack.
Technical Information
|
|
230V SLIDING GATE AUTO. KIT UP TO 800KG
| Code: |
21BK1800KIT |
| Sold as: |
EACH |
The BK-800 intensive use sliding gate automation kit is ideal for collective entrances such as condominium's, hospitals or other public accessways. Like all the BK range it features an "auto-diagnosis system" which makes the BK-800 the ideal solution for ensuring functionality and movement control of intensive use gates weighing up to 800kg.
The installation of an electric sliding gate system is a little more involved than any other type of electric gate as it has to have more civil engineering done at the initial stage, but once the correct ground track and/or cantilever roller frames are installed, then the installation follows the same format as with other types of electric gates, continuing with the mechanical engineering stage of gate fabrication and gate mounting, followed by the final stage of electrical fixing and commissioning.
1 x BK800 motor with built in control panel, radio decoder and amperometric obstacle detection.
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
This gate kit can use CGZ or CGZS toothed gate rack.
Technical Information |
|
[top of page]
For gates with heavier wings (up to 800kg) and therefore with greater requirements for control and passage safety, the BX series is a range of automation suitable for various requirements of installation, operation and safety.
The options range from the basic version - recommended for residential use only - to low-voltage motors for intensive and condominium use, right through to the most sophisticated versions equipped with an ENCODER for constant electronic system control.
ENCODER technology supersedes the mechanical end-stop, ensuring the electronic movement control and end-stop location points.
Main Functions:
Beyond the usual command and safety functions, new electronics offers some characteristics that allow for full automation control and optimisation of the service, such as:
- PARTIAL WING OPENING for pedestrian passage, if applicable. (ZBX7 / BXE / BX241 / BXE241 boards).
- SELF-CODING of the radio code between transmitter and receiver.
- PRE-FLASHING on opening and closing (except board ZBX6).
- Obstacle detection (ZBX7 with B4336 / BXE).
- Opening and closing slow-downs (ZBX7 with B4336 / BXE-241).
- Amperometric obstacle detection (BX241 / BXE241).
- The gate is stopped directly by the transmitter (not available in ZBX6).
- SAFETY EVEN WITH GATE STOPPED. Every opening or closing command is cancelled when an obstacle is detected by the photoelectric cells or by other safety devices of the system (not available in ZBX6).
- Amperometric obstacle device (BX-241 / BXE-241).
- Possibility of connecting two combined motors.
- MASTER-SLAVE function: maximum simplification of the connections in the applications of two combined motors BXE / BXE241).
SUPERSEDED BY 21 BX74 KIT 230V SLIDING GATE AUTO. KIT UP TO 400 KG
| Code: |
21BXAKIT |
| Sold as: |
EACH |
The BX-A kit will automate gates up to 400kg. It is more suitable for light residential applications and features the same functions as the other BX models in the series.
The BX-B and BX-E kits are both suitable for slightly heavier gates - up to 800kg - and therefore demand extra control for safety. The BX-B kit features manual limit switches, whereas the BK-E kit incorporates automatic encoder technology, which automates the electronic movement control and endStop location points making the final set-up on installation that little bit easier.
1 x BX-A 230V operator
1 x Electronic Circuit Board
1 x Radio card
2 x Radio Transmitter
1 x Radio Antenna
1 x Pair Safety Photocells
Technical Information
|
|
SUPERCEDED BY 21BX78KIT SLIDING GATE KIT FOR GATES UPTO 800KG
| Code: |
21BXBKIT |
| Sold as: |
EACH |
The BX-A kit will automate gates up to 400kg. It is more suitable for light residential applications and features the same functions as the other BX models in the series.
The BX-B and BX-E kits are both suitable for slightly heavier gates - up to 800kg - and therefore demand extra control for safety. The BX-B kit features manual limit switches, whereas the BK-E kit incorporates automatic encoder technology, which automates the electronic movement control and endStop location points making the final set-up on installation that little bit easier.
1 x BX-B 230V operator
1 x Electronic Circuit Board
1 x Radio card
2 x Radio Transmitter
1 x Radio Antenna
1 x Pair Safety Photocells
Technical Information |
|
230V SLIDING GATE AUTO. KIT UP TO 800 KG BX-E Kit
| Code: |
21BXEKIT |
| Sold as: |
EACH |
The BX-A kit will automate gates up to 400kg. It is more suitable for light residential applications and features the same functions as the other BX models in the series.
The BX-B and BX-E kits are both suitable for slightly heavier gates - up to 800kg - and therefore demand extra control for safety. The BX-B kit features manual limit switches, whereas the BK-E kit incorporates automatic encoder technology, which automates the electronic movement control and endStop location points making the final set-up on installation that little bit easier.
1 x BX-E 230V operator
1 x Electronic Circuit Board
1 x Radio card
2 x Radio Transmitter
1 x Radio Antenna
1 x Pair Safety Photocells
Technical Information
|
|
|
[top of page]
SLIDING GATE KIT FOR GATES UPTO 3500KG BY 3500
| Code: |
21BY3500TKIT |
| Sold as: |
EACH |
The heavy duty BY3500 sliding gate motor is ideal for large commercial installations such as those shown here with gates up to 3500kg. The BY3500 operates on 230-400V three phase - 750W . The BY3500 is self locking (protection grade IP54), and features total insulation between the control panel and the motor unit, effectively protecting the circuitry from external elements including rain and small insects. Gate travel is checked by encode for precise, constant regulation of closed and open points.
1 x BY -3500T motor with built-in control panel
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
This gate kit uses CGZ6 toothed gate rack.
|
|
[top of page]
BX243 KIT FOR SLIDING GATES UP TO 300KG 24V EN COMPLIANT
| Code: |
21BX243KIT |
| Sold as: |
EACH |
The BX243 Sliding gate motor incorporates the safety requirements prescribed in UK law for
automated gates. Capable of keeping the power output below required levels it makes installation and testing very simple.
The BK243 is capable of incorporating its in built features with the CAME DF safety edge and DB wireless technology, producing safe, reliable sliding gates with ease.
1 x BX243 motor with built in control panel, radio decoder and amperometric obstacle detection.
1 x Radio receiver
1 x Tuned antenna
2 x Remote control handsets
1 x Pair safety photocells
Technical Information |
[top of page]
